Solv Tech 8000 is a combination of dispersing agents and scale inhibitors. It is used to remove old deposits of scale, mud, oil, slime, and other fouling materials and to prevent the formation of new non microbiological deposits. It is recommended for use in boilers, cooling water systems, air washers, petroleum secondary recovery systems, and other industrial water systems.
Features and Benefits
For on-line cleaning of closed recirculating systems: Solv Tech 8000 should be slug fed at a rate of 150-330 ppm (19.2 - 38.4 ounces/1000 gal.). Product should be allowed to recirculate for a minimum of 24 hours. Flush and inspect system prior to addition of other chemicals.
For on-line cleaning of cooling water systems: Solv Tech 8000 should be maintained at a rate of 40 to 50 ppm in the circulating water based on loss to bleed off or blow down.
For on-line cleaning of low to medium pressure boiler systems: Solv Tech 8000 should be maintained at a rate of 40 to 50 ppm in the circulating water based on loss to bleed off or blow down.
At these recommended concentrations, Solv Tech 8000 will not remove deposits so quickly that subsequent plugging of boiler or condenser tubes will occur. If a more rapid de-scaling is desired, concentrations two to three times those suggested above are recommended.
Methods of Application
Solv Tech 8000 is a slight foaming liquid that can be pumped into the system or dispensed through a bypass feeder.
Solv Tech 8000 is a slight alkaline liquid packaged in non returnable containers.