JACK is a highly silicated, alkaline, circulation cleaner specially formulated for CIP and spray cleaning. This low foaming product is fast acting, and is especially effective on soft metals such as aluminum.
40 lbs, 100 lbs, 450 lbs.
Features and Benefits
Jack is an alkaline cleaner especially formulated for spray cleaning and circulation cleaning applications. It's low foaming formulation is fast acting to quickly penetrate and remove the toughest food soils. Jack is especially effective on soft metals such as aluminum.
Spray Cleaning: Use 1/2 to 2 ounces of Jack per gallon of hot water 140-150°F. Spray all surfaces until clean, then rinse with potable water.
CIP Applications: 2-3 lbs of Jack per 50 gallons of water at 150-160°F.
DANGER – FOR INDUSTRIAL USE ONLY!
Avoid breathing dust. Wear chemical goggles and rubber gloves when handling this product.
Eyes: In case of contact, immediately flush eyes with plenty of clean running water for at least 15 minutes, lifting the upper and lower lids occasionally. Remove contact lenses if worn. Get medical attention.
External: In case of contact, immediately flush skin with plenty of clean running water for at least 15 minutes, while removing contaminated clothing and shoes. If irritation occurs, get medical attention.
Internal: If swallowed, do not induce vomiting. Get medical attention. If victim is fully conscious, give plenty of water to drink. Never give anything by mouth to an unconscious person.
DOT Classification Shipping Name
Corrosive solid, basic, inorganic, N.O.S., (disodium trioxosilicate, anhydrous), 8, UN 3262, PGII, ERG #154
Manufactured in accordance with regulations established for food plants operating under USDA guidelines under the classification of A-1.